Litter bin composed of a supporting structure with steel coating, equipped with four inner liners for separate collection and aluminum lid with holes provided with conveyors in sheet metal. The (more...)
Archives
02/07/2013
AERO RECYCLING LITTER BIN
Collection of litter bins composed of a supporting structure with steel coating, equipped with three or four inner liners for separate collection and aluminum lid with holes provided with conveyors (more...)
08/07/2013
AGATA P BENCH
Bench composed of a seat in HPC (High Performance Concrete) and a central support base in steel. Fixing: Pre-drilled for anchors Dimensions and weight: 2100x750 mm H 450 mm 420 kg (more...)
01/12/2017
AIR – A COLLECTION BENCH-TABLE
Modular steel table with two integrated seats and composed of a supporting structure made of thick steel sheet and a plane in tubes. Fixing: Freestanding with pedestals or Installation with threaded (more...)
29/02/2016
AIR – C COLLECTION MODULAR BENCH-TABLE
Collection of modular tables with integrated seats, made of UHPC (Ultra High Performance Concrete), composed of thick metal sheet supports, a plane and two seats in UHPC (Ultra High Performance (more...)
21/04/2021
AIR – CIRCLE
Collection of round tables with integrated stools, made of HPL (High Pressure Laminate), composed of a supporting structure in thick steel sheet, with proper tube connections for the seats and (more...)
01/12/2017
AIR – L COLLECTION BENCH-TABLE
Modular steel table with integrated seats and composed of a thick steel sheet supporting structure, a plane and two wooden seats. Fixing: Freestanding with pedestals or Installation with threaded bars Accessories: Anti-theft (more...)
01/12/2017
AIR-PORT A COLLECTION
Collection of modular benches composed of a seat made of steel rods and two supports in powder coated cast aluminum. Three versions are available: without backrest, with half right backrest (more...)
01/06/2016
AIR-PORT C COLLECTION BENCHES
Collection of modular benches composed of a seat in UHPC (Ultra High Performance Concrete) and two supports in powder coated cast aluminum. Three versions are available: linear, curved, linear without (more...)
01/12/2017
AIR-PORT L COLLECTION
Collection of modular benches composed of a wooden seat and two supports in powder coated cast aluminum. Three versions are available: without backrest, with half right backrest and half left (more...)
02/07/2013
ALFA BETA GAMMA PLANTER
Irregular shaped planter, made entirely out of steel sheet. It is equipped at the bottom, with a base with fixings to regulate its slant. Each planter can be accessorised with (more...)
03/07/2013
ALHENA SHELTER
PRODUCTS AVAILABLE EXCLUSIVELY FOR EUROPE Shelter made up of a tubular steel bearing structure, equipped on one side with steel sheets, curved to give an elliptical profile. Inside the body, equipped (more...)
26/11/2021
ALTEREGO SEATS & PLANTERS
ALTEREGO 1D | 4V Modules of the Alterego collection composed of monolithic seats made of HPC (High Performance Concrete), partially emptied inside and available in two sizes. They can be installed (more...)
03/07/2013
ALTUS LATUS DISPLAY BOARD
Display board made up of two vertical elements in two diameters and two heights, entirely in aluminium but with a steel internal post, and of a signage board, inserted in (more...)
08/07/2013
AMBRA BENCH
Cantilevered monolithic bench in PDM (Reconstituted Stones). Finishes: Brushed top + Sandblasted sides Fixing: Installation with threaded bars Dimensions and weight: 1350x450 mm H 450 mm 327 kg (more...)
12/04/2021
AMETISTA ACCESSORIES
The seat and the backrest compatible with the Ametista collection can be equipped with WPC (Wood Polymer Composite) coating. Dimensions and weight: seat 2460x460 mm H 30 mm 35 kg backrest 455x385 mm H 30 mm (more...)
08/07/2013
ANASTASIO, MAKATITE, REALGAR BENCHES
technical development executive: Stefano Alonzi, Gaetano De Napoli, Adriano Venudo, Valter Tronchin Collection of modular benches in PDM (Reconstituted Stones), available in three versions. Anastasio is a monolithic seat with inclined sides. (more...)
03/07/2013
ANNUNCI DISPLAY STANDS
Single-sided steel display board with showcase made of steel with perimeter edging in stainless steel plate. The display surface, measuring 934x455 mm, is protected by tempered glass equipped with hinges and a (more...)
08/06/2021
ARENA BIKE
Modular bike shelter composed of a load-bearing steel structure composed of a base plate and an inclined steel column equipped with an inclined steel tube support. Both support a frame (more...)
03/07/2013
ARTS SHELTER
PRODUCTS AVAILABLE EXCLUSIVELY FOR EUROPE Shelter constructed from special profile extruded aluminium bearing columns with thin vertical stripes, with steel base plates, connected at the top by an extruded aluminium profile (more...)
03/07/2013
ASPEN INFORMATION POST
Information post made up of a supporting, triangular section, tubular post to concrete-in, coated with steel sheet. Together with an information board in steel sheet, customisable with adhesives and prespaced (more...)
02/07/2013
ASTER PLANTER
Planters, with simple cylindrical or square shape, available in various sizes, entirely made from steel sheet, with a circular or squared lower base support with fixings to regulate its slant. (more...)
03/07/2013
ATENA SHELTER
PRODUCTS AVAILABLE EXCLUSIVELY FOR EUROPE Collection of shelters composed of steel load-bearing columns equipped with base plate, a back wall and a monolithic frame at the top supporting the roof. The (more...)
03/07/2013
ATHOS INFORMATION PANEL
Information panel made up of a steel sheet support, constructed from a curved profile with base plate, and a shaped stainless steel panel which is fixed to the support with (more...)
18/01/2018
AUSTEN seat | planter
AUSTEN W Modular trapezoidal seat, without backrest, composed of a supporting structure made of UHPC (Ultra High Performance Concrete), with recess at the base, and a wooden seat. It can be (more...)
10/11/2014
B-B SASS BARBECUE
Collection of steel barbecue composed of a supporting structure in electrowelded mesh with sheet metal bottom, equipped with integrated brazier in Corten steel sheet and stainless steel grid with anti-theft (more...)
13/11/2014
B-BQ BARBECUE
Barbecue made of Corten steel composed of a rotating top equipped with refractory plate and a stainless steel anti-theft grid, adjustable in three heights. The structure stands on a central (more...)
02/02/2018
BACH DISPLAY STANDS
Display board available in two single-sided sizes, with structure made of a tubular steel frame and a pressed steel panel. The door is made of a extruded aluminium profile with (more...)
11/06/2021
BAIA – ELEMENTS
Baia collection consists of different elements. The linear or curved benches, available in two different heights, are composed of a seat in HPC (High Performance Concrete) and a central steel (more...)
12/08/2022
BAILO COLLECTION
Collection of benches composed of backrest and seat in steel rods / woord / WPC (Wood Polymer Composite), equipped with two supports with armrests in powder coated cast aluminum. The (more...)
22/01/2018
BALZAC PLANTERS
LARGE PLANTERS PDM flower boxes shaped as an inverted bell; supplied with sanded sides and polished top. Available in three heights, and in a version with wooden seat. Top diameter: 1.5 (more...)
02/07/2013
BAMBÙ PLANTER
Rectangular planter, available in two lengths, made from steel sheet. The planters are equipped with a base support with fixings to regulate its slant. Each planter can be accessorised with (more...)
01/07/2013
BIG HARRIS COLLECTION OF BENCHES
Collection of benches, without backrest, composed of steel supports, a double perimeter frame in wood, a seat, made of full lenght wooden slats (version B) or staggered joints (version A). (more...)
25/02/2021
BIG HARRIS WPC COLLECTION
Collection of benches, without backrest, composed of steel supports, a double perimeter frame and a seat, made of WPC (Wood Polymer Composite). Four different lengths are available. Fixing: Pre-drilled for anchors (more...)
02/07/2013
BIKE BIKE RACKS
Modular bike rack with wheel racks in steel tube fixed on horizontal bars. Ground fixing can be done by ground embedding four galvanised steel bars, with suitable bolts or by (more...)
02/07/2013
BLOOM LITTER BIN
Tulip-shaped litter bin composed of “petals” in shaped steel, with a circular base and an opening lid with central hole, equipped with snap lock. The litter bin is equipped with (more...)
01/06/2016
BOTTE LITTER BIN
Litter bin made of HPC (High Performance Concrete) equipped with opening lid in stainless steel with central hole and lock. It is also equipped with bag holder ring along the (more...)
02/03/2021
BOX SOLID LITTER BIN
Collection of rectangular litter bins composed of a thick steel sheet supporting structure and two specular panels of which one is fixed and one which opens. The latter is equipped (more...)
02/07/2013
BOX WOOD – IRON – LINE LITTER BIN
BOX WOOD Collection of rectangular litter bins composed of a thick steel sheet supporting structure and two specular panels of which one is fixed and one which opens. Both panels are (more...)
27/11/2014
BRAVO BOOM LITTER BIN
Litter bin made of a simple cylindrical container made of a smooth or perforated or laser cut decorated steel sheet (this version to allow visibility of the content). The litter (more...)
02/07/2013
BRAVO SLIK AND BRAVO HOLE LITTER BIN
Litter bin consisting of a simple cylindrical container in solid or perforated sheet, complete with a snap-shut ring to hold waste sacks. It can be supplied with a steel tube (more...)
29/04/2021
BREAK TIME I
Collection of seats available in different models. SIL is a bench with backrest composed of a seat in steel rods and two supports in steel tube. The SI7S, SI7, SI4S, SI4 models (more...)
29/04/2021
BREAK TIME TI
Collection of tables available in different heights. The steel structure, with plane in rods, rests on tube supports. All tables are equipped with handbag hooks. The supports on the TIL model are (more...)
30/04/2021
BREAK TIME TW
Collection of tables available in different heights. The steel structure, with plane in rods, rests on tube supports. All tables are equipped with handbag hooks. The supports on the TWL (more...)
30/04/2021
BREAK TIME W
Collection of seats available in different models. SWL is a bench with backrest composed of a wooden seat and two steel supports. The SW7S, SW7, SW4S, SW4 models are single (more...)
01/07/2013
BULL BENCH
Collection of benches, with or without backrest, composed of two supports in steel plate with armrests covered with wood and a wooden seat. Dimensions and weight: 2000x494 mm h 420 mm Armrest 593 (more...)
13/11/2014
C-BQ BARBECUE
Barbecue made of Corten steel composed of a rotating top equipped with refractory plate and a stainless steel anti-theft grid, adjustable in three heights. The structure stands on an “L” (more...)
27/02/2020
C3 LITTER BINS FOR INDOOR
Set of modular litter bins for indoor, made of a cylindrical trunk, available in different heights with customized and colored lid, simply laid. They are in galvanized and powder coated steel (more...)
02/07/2013
CAFÈ BIKE RACKS
Cycle stand composed by two connected semi-circle shapes in thick steel plate, connected with horizontal supports with baseplate. Can also be used as a modular barrier. POWDER COATED STEEL OR CORTEN (more...)
01/07/2013
CAMPUS BENCH
Collection of benches, with or without backrest, composed of steel supports and a wooden seat. Fixing: Pre-drilled for anchors Dimensions and weight: 2000x621 mm 87 kg 2000x648 mm 107 kg H 780 mm h 433 (more...)
14/05/2014
CANAPÈ DOUBLE BENCH
Collection of benches, with or without backrest, composed of steel supports and a wooden seat. Two lengths and widths, with backrests of different size, are available. The versions with backrest (more...)
20/12/2017
CANN bench
Monolithic cantilevered bench in PDM (Reconstituted Stones), with recess at the base. Fixing: Installation with threaded bars Accessories: Stainless steel coating for the base – LED lighting Dimensions and weight: 2270x751 mm (H) 430 (more...)
02/07/2013
CESTIS LITTER BIN
Litter bin made up of an entirely cast aluminium pole, a galvanised steel container with steel bag holder and a cast aluminium cover which opens with a three-winged, stainless steel (more...)
02/07/2013
CESTUM LITTER BIN
Cylindrical litter bin composed of a steel supporting structure, a perimeter covering made of cast aluminum elements and a steel base. The litter bin is equipped with inner liner and steel lid (more...)
03/07/2013
CHAMONIX DISPLAY BOARD
Display board made up of a supporting, triangular section, tubular structure to concrete-in, coated with steel sheet. Together with an information board in steel sheet, it can be personalized on (more...)
02/07/2013
CHANDY LITTER BIN
Litter bin composed of a truncated-conical structure, rain cover in cast aluminum equipped with a stainless steel ashtray, which can be opened through lock, and a tube base resting on a (more...)
15/07/2016
CICA CIGARETTE BIN
Rectangular cigarette bin in stainless steel composed of a removable container, with a cigarette extinguisher top plate, equipped with a slit. The elements are integrated in a supporting structure in steel tube, (more...)
02/07/2013
CICLOS BIKE RACKS
Bike rack constructed from a spiral frame in tubular steel, attached to two horizontal bars in steel tube. The structure can be fixed to arched steel tube supports with base (more...)
02/07/2013
CIRCLE BIKE RACK
Bike rack made from bent tubular steel with decorative element, designed to attach bikes or to display logos. Ground fixing is with bolts fixed in the pre-drilled elliptical base plates. (more...)
01/04/2021
CITY OF SION
CITY OF SION EH | EH + S Modular concave planters made of sheet steel and equipped with wooden seat. Two models, with or without backrest, are available. They can be installed (more...)
02/07/2013
CLOS BIKE RACKS
Bike rack made from two laser cut steel sheets and coupled with a spacer. Ground fixing is with bolts. The Bike rack can be personalized as the upper part of the (more...)
02/07/2013
CONGA LITTER BIN
Litter bin is made of sheet steel cylindrical structure, laser cut and perforated with flora motifs, with cover sheet with a central hole for rubbish. The cover, equipped with a (more...)
02/07/2013
CORALLO BOLLARD
Cube-shaped bollard made in reconstituted stone. FINISHES: SMOOTH SEAT AND SANDBLASTED SIDES FIXINGS: FREE STANDING Dimensions and weight: 450x450 mm H 500 mm 245 kg (more...)
02/07/2013
CORTE LITTER BIN
Cylindrical litter bin in steel sheet with drawn steel waste sack holder. The support is made up of a double shaped sheet, with stainless steel tube spacer, closed with two (more...)
01/07/2013
CORTEN STYLE SEATS DEA LUA ELA DIVA STELLA
CORTEN – STYLE DEA LUA ELA DIVA STELLA Collection of modular benches made of Corten steel sheet with four supports, seat and backrest, the latter decorated with floral patterns. The following versions (more...)
30/01/2018
CRUNA BIKE RACKS
Cast aluminium elliptical bicycle rack with a slim profile. It features a hole on the top to fasten the locks. POWDER COATED ALUMINUM FIXINGS: BELOW GROUND INSTALLATION Dimensions and weight: 460x50 mm (H) 875 (more...)
02/07/2013
CUBE BOLLARDS
Pedestrian bollard with square shape made entirely out of steel sheets and provided on a square lower base support. The bollard’s shape and dimensions gives it dual-purpose as a seat. (more...)
19/01/2018
CUP LITTER BIN
Litter bin made of High Performance Concrete (HPC), available in the VELVET finish, equipped with a ring-shaped powder coated steel cover with triangular lock, stainless steel ashtray with cable theft, (more...)
02/07/2013
CYCLUS BOLLARD / BIKE RACK
Bike rack and/or pedestrian bollard made entirely of cast aluminium and made up of a central post and two half-rings fixed with stainless steel anti-theft screws. Ground fixing is either (more...)
02/07/2013
DAHLIA PLANTER
Planters, with simple cylindrical or square shape, available in various sizes, entirely made from steel sheet, with a circular or squared lower base support with fixings to regulate its slant. (more...)
11/07/2013
DIAMANTE 45° | 15° | P | F BENCHES
DIAMANTE 45° | 15° | P Collection of modular benches, without backrest, made of HPC (High Performance Concrete) composed of a seat and two supports in steel plate or sheet. Three (more...)
11/07/2013
DIAMANTE ACCESSORIES I SS | 2 SS | ST
Bench made up of a reconstituted marblestone/granite support surface, available in the full linear version, with a ½ hole, 1 or 2 holes or in the 45° section version. The (more...)
11/07/2013
DIAMANTE ACCESSORIES W SP | 2SP | SS | 2SS
DIAMANTE ACCESSORIES W SP | 2SP | SS | 2SS The P model of the Diamante collection can be equipped with the following accessories: The W SP module: a wooden seat without backrest. The W (more...)
02/07/2013
DIFFUSION NEWS BOLLARD
Pedestrian bollard made by laser cutting steel tubes or profiles, round, square or rectangular section, reproducing writing or pictograms in contrast to the internal detail, in coated steel. Fixing is (more...)
02/07/2013
DIX BOLLARD
Pedestrian bollard made from tubular steel, available in various sizes and heights. All models have a steel sheet upper plate and are available with base plate or extended for installation (more...)
03/07/2013
DUPLUS PARVUS SINGULA INFORMATION POSTS
Information post made up of one or two vertical elements in two diameters and two heights, entirely in aluminium but with a steel internal post, and of extruded aluminium signage (more...)
01/07/2013
ECOMIX RECYCLING LITTER BIN
Litter bin, in a truncated pyramid shape, made in steel sheet with cast aluminium cover, which can be painted in four colours to facilitate the collection of different categories of (more...)
10/11/2014
ECOSIDE LITTER BIN
Litter bin consisting of an internal structure in stainless steel tubular with external body in steel sheet. The front door opens to a flap with gas pistons on special hinges (more...)
16/04/2021
EDGE SMART
Collection of benches without backrest in HPC (High Performance Concrete), composed of a structure with two cantilevered seats joined by a steel sheet element. Two versions are available: with or (more...)
16/04/2021
EDGE SX | DX
Collection of benches without backrest in HPC (High Performance Concrete) composed of a structure with cantilevered seats. Two models are available: one with right seat, the other with left seat. Fixing: (more...)
02/07/2013
ERMES LITTER BIN
Cilindrical litter bin with fixed cover and an internal steel waste-sack holding ring. The litter bin can be fixed directly onto a wall, onto an existing post or fixed to (more...)
02/07/2013
EXPLOSION BOLLARD
Pedestrian bollard in square steel tube designed with diagonal openings in the base. An internal post in stainless steel or coated steel, is available. The internal post remains visible below (more...)
02/07/2013
FLÒ PLANTER
Modular planter made of steel sheet, available in four different formats, equipped on the lower edge with a perimeter frame and flat steel profile stiffening crosses, and with special fixings (more...)
02/07/2013
FLORES PLANTER
Planters made up of a supporting structure, an adjustable base in three points and a steel upper ring, whilst the outercovering is put together by mechanically fixing cast aluminium elements, (more...)
10/11/2014
FOGLIA COVER
Modular cover constucted of three tube uprights with base plates. The roof is composed of a steel bearing frame buffered, above and below, of shaped insulated panel modules. In the (more...)
02/07/2013
FÙ CIGARETTE BIN
Cigarette bin made of a steel tube structure and the liner itself, in stainless steel tube. The liner is equipped with an ashtray plate and, thanks to the triangular key (more...)
02/07/2013
FUENTE C – E – R DRINKING FOUNTAIN
Drinking Fountain made from a steel tube, available in either rectangular, circular or elliptical section. The nickel-plated brass tap is a push button type with a spring return that is (more...)
19/05/2021
FUENTE DOG
Fountain composed of an elliptical steel sheet structure and two chrome-plated brass push button taps: one with stainless steel bowl for animals, the other with a rectangular tank. The latter (more...)
07/11/2014
FUMA CIGARETTE BUTT BIN
Cigarette butt bin in two sizes, comprised of a steel tube and an internal container,in stainless steel tube. The container is equipped with plate ashtray and, thanks to the opening (more...)
06/06/2016
GAVITELLO LITTER BIN
Litter bin made of HPC (High Performance Concrete) with Stainless steel opening lid with central hole and lock and equipped with a bag holder ring along the internal circumference. Capacity: 85 (more...)
11/05/2021
GEMINI DOG
Collection of litter bins composed of a thick steel sheet structure, a tube support and two panels, one is fixed and one which opens with snap lock and equipped with a (more...)
26/08/2022
GENESIS BOLLARD AND BARRIER
The GENESIS bollard is available in 3 sizes: Ø 76 mm, 800 mm high, Ø 102 mm, 700 mm or 1000 mm high and Ø 168 mm, 600 mm high. (more...)
02/07/2013
GITTER BARRIER
Modular barrier made up by connecting thick, folded plates, shaped like a large mesh net. The handrail is cylindrical stainless steel tube. The panel, also available in a “terminal” version (more...)
14/09/2018
GPDUE BUS SHELTER
Bus shelter comprising a series of covers with different heights and sizes, shaped as an inverted pyramid with powder coated steel structure and coated with powder coated steel sheet. POWDER COATED (more...)
08/01/2018
GRANDIFIORIERE SEDUTE E FIORIERE
GRANDIFIORIERE GSO | GSV Modular linear element of the Grandifioriere collection, composed of a Corten steel structure, with horizontal or transversal integrated wooden seat. It can be combined with the other (more...)
02/07/2013
GUARDIA BIKE STAND
Bike stand made from shaped steel plate, with a brushed and electropolished stainless steel movable connecting rod, particularly useful to attach a lock to the bike frame. POWDER COATED STEEL OR (more...)
08/07/2013
HARRIS ISOLA MODULAR SEATS COLLECTION
Collection of modular seats, without backrest, composed of a double perimeter frame and a seat, both made of full lenght wooden slats. Four versions are available: two square seats of (more...)
25/02/2021
HARRIS ISOLA TRAPEZIO WPC
Trapezoidal modular seat, without backrest, composed of a double perimeter frame and a seat, both made of WPC (Wood Polymer Composite). The seats can be installed individually or in composition. Dimensions: (more...)
26/02/2021
HARRIS ISOLA WPC COLLECTION
Collection of modular seats, without backrest, composed of a double perimeter frame and a seat, both made of WPC (Wood Polymer Composite). Four versions are available: two square seats of (more...)
08/07/2013
HARRIS WOOD H 200 | H 300 SEATS
Collection of modular seats composed of steel supports, a wooden perimeter frame, a seat, made of full lenght wooden slats (version B) or staggered joints (version A). Two sizes, with or (more...)
26/02/2021
HARRIS WPC COLLECTION MODULAR SEATS
Collection of modular seats composed of steel supports, a perimeter frame, a seat, both made of WPC (Wood Polymer Composite). Two sizes, with or without backrest, are available. The WH (more...)
02/07/2013
HESPERIA BOLLARD
Pedestrian bollard made of shaped steel sheet, with a square base with vertical and slanted grooves on two sides. POWDER COATED STEEL OR CORTEN STEEL Dimensions and weight: 200x200 mm H 800 mm (more...)
06/06/2016
HOBA SEATS
Collection of polyedric seats, made of HPC (High Performance Concrete), partially emptied inside. Two sizes are available. Fixing: Freestanding with pedestals or Installation with threaded bars Dimensions and weight: HOBA A 1048x602 mm H 450 (more...)
08/07/2013
HORN BENCHES
Collection of benches composed of two supports in powder coated cast aluminum and a steel frame that supports a wooden seat. They are available with or without wooden backrest. Fixing: Installation (more...)
11/11/2014
HUT SHELTER
Collection of shelters composed of a load-bearing structure and a roof, both in steel tube and a back wall in coupled glass sheets. The roof is covered on the top (more...)
15/12/2021
I-BOX ACCESSORIES
The R1, R2, 4V benches of the I-Box collection can accomodate from one to two armrests (A) in steel sheet. The 1D, R1, R2, 4V benches of the I-Box collection can (more...)
02/07/2013
I-BOX SEATS
Collection of modular monolithic seats, without backrest, made of HPC (High Performance Concrete), partially emptied inside, with recess at the base. The following modules are available: 1D: cubic single module. R1 and (more...)
03/07/2013
ICARO DISPLAY BOARD
Double-sided display board made entirely out of steel sheet, fixed to the ground with a special stainless steel base block. The display surface, measuring 700×1000 mm, may be protected by (more...)
02/07/2013
ICS BOLLARDS
Barrier made of laser cut steel sheet, suitably pressed and welded in the centre, the upper part couples with a stainless steel inlay with hidden welding. The barrier has an (more...)
01/03/2021
IDEAS L BENCHES
Collection of benches composed of a seat made of wooden slats, positioned vertically and connected to each other through a steel connecting bar, with stainless steel ends and two steel (more...)
08/07/2013
IDEAS T BENCHES
Collection of benches composed of a seat made of wooden slats, positioned vertically and connected to each other through a steel connecting bar, with stainless steel ends and one steel (more...)
02/07/2013
INSIDE CYCLE STAND
Cycle stand made up of a rectangular shaped plate with rounded corners, the attached tubular support can be supplied with a base plate, or with extensions for below ground fixing. POWDER (more...)
10/01/2018
ISOLAURBANA SEAT & PLANTERS
ISOLAURBANA D | W Modules of the Isolaurbana collection. The D model is a bench, without backrest, composed of a seat in HPC (High Performance Concrete) and two supports in powder (more...)
02/07/2013
ISTRA BOLLARD
Pedestrian bollard made in cast aluminium with embossed leaf motifs. POWDER COATED ALUMINUM Dimensions and weight: Ø 85 mm H 960 mm (+ 150 mm) 6 kg FIXINGS: PRE-DRILLED FOR ANCHORS OR BELOW GROUND INSTALLATION (more...)
10/11/2014
JOY j101 playgrounds
Fixed platform with stainless steel frame. STAINLESS STEEL + HIGH DENSITY POLYETHYLENE FIXINGS: BELOW GROUND INSTALLATION OR PREDRILLED FOR ANCHORS (more...)
10/11/2014
JOY j102 playgrounds
Fixed platform with stainless steel frame combinable with linear elements to form raised walks/trim trails. STAINLESS STEEL + HIGH DENSITY POLYETHYLENE FIXINGS: BELOW GROUND INSTALLATION OR PREDRILLED FOR ANCHORS (more...)
10/11/2014
JOY j201-2-3 playgrounds
j201 Springer with stainless steel structure, HDPE seat and handels. j202 I play springer in stainless steel, HDPE platform and coloured aluminum grab ring. j203 Springer in stainless steel, HDPE platform and coloured aluminum grab (more...)
10/11/2014
JOY j204-5-6 playgrounds
j204 Springer with stainless steel frame, footrest HDPE and aluminum ring painted with a handle. j205 Springer with stainless steel frame, seat in HDPE and aluminum ring painted with a handle. j206 Springer See-Saw with (more...)
10/11/2014
JOY j207 playgrounds
I play springer in stainless steel, HDPE platform and coloured aluminum grab ring. STAINLESS STEEL + HIGH DENSITY POLYETHYLENE + POWDER COATED ALUMINUM FIXINGS: BELOW GROUND INSTALLATION OR PREDRILLED FOR ANCHORS (more...)
10/11/2014
JOY j301 playgrounds
Elements of various heights in shaped stainless steel with coloured aluminum ring. The elements can be positioned in series to form hanging paths and trails. STAINLESS STEEL + POWDER COATED ALUMINUM FIXINGS: BELOW (more...)
10/11/2014
JOY j401 playgrounds
Elements in stainless steel with stainless steel ring customizable with HDPE shapes in various desings . The elements can be positioned in a series and/or joined together by steel bars (more...)
10/11/2014
JOY j402 playgrounds
Elements in stainless steel with stainless steel ring customizable with HDPE shapes in various desings. The elements can be positioned in series and/or joined by steel modules to build hanging (more...)
10/11/2014
JOY j501, j502 playgrounds Swing
Swing with stainless steel structure and seat in HDPE. Structure is customizable with HDPE shapes in various desings and with stainless steel elements plus terminal elements in the shape of (more...)
10/11/2014
JOY j601 playgrounds
Slide the Polyethylene structure with stainless steel base, customizable with HDPE dinosaur shape. STAINLESS STEEL + HIGH DENSITY POLYETHYLENE + POWDER COATED ALUMINUM FIXINGS: BELOW GROUND INSTALLATION OR PREDRILLED FOR ANCHORS (more...)
10/11/2014
JOY j701 playgrounds
Decorative structure in stainless steel with HDPE fish shaped terminal elements STAINLESS STEEL FIXINGS: PRE-DRILLED FOR ANCHORS (more...)
10/11/2014
LAND TREE-GRILLES
Treeguard made of shaped and decorated steel sheet with suitable reinforcements. It is offered in three square versions, of various sizes. For each version you can request its steel subframe. POWDER (more...)
24/01/2018
LEGGIO INFORMATION PANEL
Information panel comprising a flat powder coated steel structure and an aluminium-composite panel. The panel can be supplied with screen-printed text or with logos. POWDER COATED STEEL + ALUMINIUM COMPOSITE PANEL FIXING: PRE-DRILLED (more...)
08/07/2013
LETTERE THREE-DIMENSIONAL DECORATIVE ELEMENTS
Three-dimensional decorative elements, letter or number shaped, made of stainless steel sheet with stainless steel base. They are only available in “sans serif” font. Fixing: Pre-drilled for anchors (more...)
11/07/2013
LIBRE BENCHES COLLECTION
Collection of benches with or without backrest, equipped with two or three arched cast aluminum supports or vertical tubular steel supports. The seat surface and backrest are made up of (more...)
17/01/2018
LIBRE DOPPIA BENCHES COLLECTION
Collection of modular benches with double-sided seats, with or without backrest, equipped with two or three arc supports in cast aluminium or vertical supports in steel tube. The seat and (more...)
11/07/2013
LIBRE EVOLUTION BENCHES COLLECTION
Collection of modular benches with double-sided seats, with or without backrest, equipped with two arc or vertical supports, made of cast aluminium or steel tube. The seat and the backrest are (more...)
11/07/2013
LIBRE SETTORE BENCHES
Collection of curved modular benches, with or without backrest, equipped with three arc supports in cast aluminum or vertical supports in steel tube. The seat and the backrest are made (more...)
03/07/2013
LITTERA, FLORA, STELO TREE-GRILL
Square tree-grilles made from steel sheet, laser cut with four designs: capital letters (LITTERA), leaves (FLORA), and geometric shapes (STELO). The grilles are made up of two halves, reinforced by (more...)
10/11/2014
LORENZ MODULAR MONOLITHIC SEATS
Collection of modular monolithic seats made of PDM (Reconstituted Stones). The following models are available: six linear modules, available in two lengths, with or without wooden backrest, with wooden seat, (more...)
02/07/2013
LOUNGE PLANTER
Planters, a truncated-pyramid shape, available in different sizes, made entirely out of steel sheet. It is equipped with a square base with screws to regulate its slant. Each planter can (more...)
30/08/2022
MARCO BOOM RECYCLING BIN
Litter bin designed for the categorised collection of rubbish with a sturdy cylindrical outer laser-cut or perforated metal sheet structure, with openable cover, equipped with one, twoo or three holes to sort (more...)
02/07/2013
MASCHERA PANELLING
Panelling, to protect ecological islands, made up of steel plates and panels in steel sheet, shaped and pierced with free designs. Ground fixing is with plates prepared for fixing with (more...)
03/07/2013
MERAK SHELTER
PRODUCTS AVAILABLE EXCLUSIVELY FOR EUROPE Shelter made up of tubular steel bearing structure and a steel central support, equipped on one side with steel sheets, curved to give an elliptical profile. (more...)
08/07/2013
MERENDA BENCH-TABLE
Collection of modular benches, with integrated table, made from the folding of a single laser cut metal sheet. Three sizes are available. Fixing: Pre-drilled for anchors Dimensions and weight: 1990x1057 mm H 750 (more...)
28/05/2018
MIZAR S MONOLITHIC SEAT
Monolithic single seat in HPC (High Performance Concrete). It can be installed individually or in compositions with the elements of the Isolaurbana collection and the Twin collection. Fixing: Freestanding Dimensions and weight: 377x377 (more...)
15/07/2016
MÒ CIGARETTE BIN
120×120 mm square section cigarette bin made of 6 mm-thick and 1000 mm-high steel plate with a 250×250 mm base plate. The central part is closed by two 2 mm-thick (more...)
02/07/2013
MOKA BOLLARD
Pedestrian bollard, made up of two vertical plates in thick steel sheet connected with horizontal plates. POWDER COATED STEEL OR CORTEN STEEL OR STAINLESS STEEL Dimensions and weight: 80x80 mm H 1000 mm (more...)
08/07/2013
MOOD BENCHES
MOOD MSD | MSDT Collection of steel benches with backrest and double-sided seat. The MSD model is made from a single sheet laser cut, with circular hole decorations. The MSDT model (more...)
09/07/2013
MOONSTONE BENCH
MOONSTONE W Free-form monolithic seat, made of PDM (Reconstituted Stones) equipped with Okumè wooden bench and prepared for fixing to the ground on a concreted leveling base. MOONSTONE Free-form monolithic seat, made of (more...)
02/04/2014
NUVOLA BENCHES AND TABLE
Collection of benches composed of a wooden seat and a supporting structure in steel plate. The benches are available in three versions: with wooden backrest, without backrest, with half wooden (more...)
03/07/2013
OBRA C, Q, R TREE-GRILL
Tree grilles made from steel sheet, laser cut and perforated with leaf designs. The grilles are made up of two halves, reinforced by a surround in steel plate, and designed (more...)
17/06/2021
OMBRA IN CITTÀ: PETALS
The range of action that integrates shadow in urban spaces The shading system designed by Makio Hasuike & Co. for Metalco is the result of a careful analysis of the typical (more...)
17/06/2021
OMBRA IN CITTÀ: TILE
The range of action that integrates shadow in urban spaces The shading system designed by Makio Hasuike & Co. for Metalco is the result of a careful analysis of the typical (more...)
02/07/2013
ONICE PLANTER
Planters made in reconstituted marblestone/granite, with 15mm horizontal profiling. The planters are offered in three sizes and have a recess which has been designed to facilitate cleaning the surrounding area. (more...)
11/11/2014
OVAL BIKE RACKS
Bicycle rack and / or pedestrian bollard, composed of a support with a base plate for fixing with bolts and of an oval central element, all in the steel tube. POWDER (more...)
19/01/2018
PACK RECYCLING BIN
Litter bin comprising a sturdy metal sheet structure, a fixed and an openable metal sheet door, equipped with triangular lock with key. The openable door is equipped with an ashtray. (more...)
02/07/2013
PALUS BOLLARD
Pedestrian bollard made entirely of cast aluminium. Ground fixing is either through concreting in the internal steel post, fixed sideways to the assembly with stainless steel anti-theft screws, or through (more...)
03/07/2013
PARTNERS SHELTER
PRODUCTS AVAILABLE EXCLUSIVELY FOR EUROPE Shelter constructed from special profile extruded aluminium bearing columns with thin vertical stripes, with tubular steel reinforcing insert and a steel base, connected at the top (more...)
03/07/2013
PENSILIS 1223 SHELTER
Shelter composed of load-bearing columns in steel profile and a monolithic frame, made of steel tube and profiles, that supports a roof made of tempered and coupled glass sheets, decorated (more...)
28/02/2023
PENSILIS 1722 SHELTER
Shelter composed of load-bearing columns in steel profile and a monolithic frame, made of steel tube and profiles, that supports a roof made of tempered and coupled glass sheets, decorated with (more...)
03/07/2013
PERLA C, Q TREE-GRILLES
Tree-grilles made from decorated and shaped steel sheet with reinforcements. They are available in three circular versions and three square versions, in different sizes. For each version, you can request (more...)
10/11/2014
PIC BULL PICNIC TABLE
Picnic table with matching seats composed of two supports in steel plate and a wooden top. The benches, without backrest, are composed of two steel plate supports and a wooden (more...)
10/11/2014
PIC NIC PICNIC TABLE
Picnic table with matching seats composed of two supports in steel plate and a wooden top. The benches, without backrest, are composed of two steel plate supports and a wooden (more...)
02/07/2013
PIERO BOLLARD
Bollard constructed from a vertical tubular steel support, available in two sizes, with cast aluminium decorative finial. On request, the bollard can be supplied complete with 2 side wings to attach (more...)
02/07/2013
PITOCCA PLANTER
Planter, in a classic truncated-cone shape, made entirely in steel sheet, equipped, at the bottom, with a circular steel base with fixings to regulate its slant. Each planter can be (more...)
13/06/2016
POD LITTER BIN
Litter bin made of Performance Concrete (HPC), available in VELVET finish, with top cover in stainless steel with snap lock and galvanized bag holder fixed rests on the inner perimeter. Capacity: (more...)
17/01/2018
PONTE W | A BENCHES
PONTE W Collection of bridge-shaped benches composed of two aluminum supports with rounded corners and a wooden seat. They are available with or without wooden backrest. PONTE A Bridge-shaped benches composed of two (more...)
19/05/2021
POUCH BAG DISPENSER
Dog waste bag dispenser composed of a steel sheet structure and an opening door with a snap lock. It is equipped with brackets for wall or existing pole fixing. Fixing: Pre-drilled for (more...)
02/07/2013
QUICK BOLLARD
Pedestrian bollard made from tubular steel. Ground fixing is either through pre-drilled base plate with bolts or with an extension to be concreted directly into foundations. A removable version is (more...)
02/07/2013
RESET BIKE RACK
Bike rack constructed from a spiral structure, made from steel tube, which sits on the ground with two cast aluminium feet. POWDER COATED STEEL OR STAINLESS STEEL Dimensions and weight: 1230x420 mm H (more...)
08/07/2013
RIVA SEATS
Collection of benches with wooden backrest and seat, composed of a supporting structure in cast aluminum. The bench is available in one, three or six seats, with or without armrests. Fixing: (more...)
08/07/2013
RIVOLA URBAN LOUNGER
Monolithic seat made of PDM (Reconstituted Stones). The element can be positioned on the ground in three different ways, one of which makes it usable as a chaise longue. Fixing: Freestanding Dimensions (more...)
02/07/2013
ROUTE BARRIER
Barrier made from a rectangular frame, a horizontal handrail and two intersected vertical parts with different slants. Thanks to two fixing holes, the panels can be supplied singularly or back-to-back and (more...)
02/07/2013
RUBINO LITTER BIN
Litter bin made out of reconstituted marblestone/granite, with a ring-shaped cover in coated steel with a triangular lock, also with an ashtray and stainless steel anti-theft cable. The waste-sack holder (more...)
08/07/2013
SARAH BENCH
Collection of bridge-shaped benches made of PDM (Reconstituted Stones). Two versions, with or without backrest, are available. Fixing: Freestanding Dimensions and weight: 2200x605 mm H 800 mm h 450 mm 733 kg 2200x605 mm (more...)
26/05/2017
SCRAMBLER CIGARETTE BINS
Cylindrical cigarette bin in stainless steel composed of a removable container with lock and equipped with side holes for the extinguishing of cigarettes and an upper slit. The elements are integrated in (more...)
08/07/2013
SEDIS | SEDIS TORSION MODULAR BENCHES
Collection of modular benches, with backrest, composed of two supports in cast aluminum. The seat and backrest are made of Okumé wood with slats of different section. The backrest has (more...)
13/06/2016
SELF BUS SHELTER
Self-supporting shelter composed of a bridge-shaped structure, in steel tube, which rests on two monoliths in PDM (Reconstituted Stones), which serve both as base and as seat. The roof is composed of (more...)
13/11/2014
SENNA DISPLAY STANDS
Collection of double-sided display boards composed of a supporting structure in steel plate and a composite aluminum panel. Two models are available, with display surface 480x1400 mm and 700x1400 mm. (more...)
02/07/2013
SIGARO BOLLARD
Bollard made from cast aluminium. Ground fixing is either by concreting the steel tube insert into the ground or with bolts trough the alternative insert with base plate. Fixings: Pre-drilled for anchors or (more...)
22/01/2018
SIZE PLANTERS
LARGE PLANTERS Open barrel steel flower box, available in three sizes; made of Corten steel sheet and equipped with a base to move it around. Arranged for LED lighting (upon request (more...)
02/07/2013
SMERALDO CYCLE RACK
Cycle rack made up of a spiral steel tube, connected to two horizontal steel tube bars. The metal structure is fixed to the reconstituted marblestone/granite side supports with a shaped (more...)
02/07/2013
SPENCER COLLECTION LITTER BINS
Spencer: C – Q – E – R – T – TC – W Litter bin in steel sheet with a cover with central hole for rubbish. The litter bin can (more...)
20/05/2022
SPENCER CP, CPP, CPQ LITTER BIN
Litter bin in steel sheet equipped with a central hole to house the ashtray. The outer structure is equipped with two opposing holes to insert the waste. The openable cover (more...)
19/05/2021
SPENCER DOG
Square, rectangular or elliptical litter bins equipped with lid, opening with snap lock, and bag holder ring. The lid is equipped with a stainless steel small door, with drop-down opening (more...)
11/10/2022
SPLASH VR MONOLITHIC SEAT
Monolithic seat with an organic shape, produced in fiber glass, thickness 5 mm, with threaded bushings at the base for fixing feet or threaded rods. The product is first treated with an (more...)
02/07/2013
SPYRA BIKE RACKS
Bike rack made of a spiral structure in steel tube, which sits on the ground on turned steel cones. Ground fixing is with suitable threaded bars concreted into the ground. POWDER (more...)
20/06/2016
STONE FREE SHAPE SEAT
Multi-purpose free-shape seat, lightened inside, available in Ultra High Performance Concrete (UHPC) or High Performance Concrete (HPC), depending on the type of use. Available finishes are ALFA for the Ultra High (more...)
07/10/2022
STONE VR FREE SHAPE SEAT
The Stone family grows: the best-selling seat returns in a new guise, now also made of fiberglass and painted with the same standard RAL colors already available in Metalco’s catalogue. LIGHT (more...)
10/11/2014
SUNNY TREE-GRILLES
Treeguard made of shaped and decorated steel sheet with suitable reinforcements. It is offered in three square versions, of various sizes. For each version you can request its steel subframe. POWDER (more...)
26/05/2017
SUPER BRAVO RECYCLING BIN WITH ASHTRAY
Litter bin comprising a smooth or cut cylindrical metal sheet container (to view the content), equipped with snap-on waste bag support ring. The litter bin comprises a tubular steel pole (more...)
18/06/2021
SUPERVERDE
Urban forestation for the cities of the future Stefano Boeri, the architect who designed the “Bosco Verticale” (Vertical Forest), has launched a new challenge, the urban forestation one: an ambitious project (more...)
03/07/2013
TARGA DISPLAY BOARD
Display board made of a bearing structure in section “T” profile steel and double doors in steel sheet, fixed with hidden stainless steel screws. Display surface: 1400×1000 mm. POWDER COATED STEEL (more...)
02/07/2013
TOPAZIO RECYCLING LITTER BIN
Litter bin made out of reconstituted marblestone/granite, with a cast aluminium cover; the cover can be painted in four colours to facilitate collection of different types of waste, or in (more...)
08/07/2013
TOSO BENCH | BIKE RACKS
Bench without backrest composed of three bridge profiles in steel tube, interspersed with two other tube elements, connected together. The space created between the profiles allows to use the bench (more...)
02/07/2013
TRANSEO BARRIERS
Pedestrian barrier made up of cast aluminium vertical elements and handrail and also 3 horizontal bars in steel plate. Ground fixing is either through concreting-in the internal post, fixed sideways (more...)
08/07/2013
TREELINE BENCHES
TREE LINE Collection of modular monolithic seats made of PDM (Reconstituted Stones). Three versions are available: two linear with different length and one “Y” shaped. Each model can be installed individually (more...)
22/01/2018
TRIANGLE MODULAR FLOWER BOXES
Steel triangular modular flower boxes, with okume multi-layer seats, which can be paired with a single, double or quadruple flower box. POWDER COATED STEEL + OKOUME PLYWOOD FIXING: FREE STANDING Dimensions and weight: 2890x2891 (more...)
02/07/2013
TULIP LITTER BIN
Litter bin consisting of steel “petals”, assembled togetherwith a stainless steel base. Inside the liner is a steel ring, to hold the waste sack. Available in two version (70/108 lt) POWDER COATED (more...)
10/11/2014
TWIN MODULAR BENCH
Collection of modular elements made of HPC (High Performance Concrete) with integrated seat and table, available in two versions. The first is composed of two cantilevered structures, crossed to create (more...)
10/11/2014
TWISTER TREE-GRILLES
Treeguard made of shaped and decorated steel sheet with suitable reinforcements. It is offered in three square versions, of various sizes. For each version you can request its steel subframe. POWDER (more...)
10/11/2014
UP MONOLITHIC MODULAR SEATS
Collection of modular “L” shaped monolithic seats made of HPC (High Performance Concrete). Three versions are available: two without backrest, partially emptied inside, one single and equipped with backrest. They (more...)
22/06/2021
URBAN MIRROR
From “accessory” to meeting point Designed for Metalco by Davide Anzalone and Alberto Mattiello, Urban Mirror is much more than a collection of street furniture. It is a tribute to the (more...)
04/06/2021
URBAN SCREEN
Modular steel system composed of a tube and laser perforated and decorated sheet metal panels and support base. Two sizes are available. Fixing: Pre-drilled for anchors or Below ground installation Dimensions and weight: 1600x140 (more...)
02/07/2013
VERSO P-X-490-240 BARRIERS
Barrier made up of “T” shaped outer profiles in steel plate and an internal stainless steel tube. It’s available also with stainless steel cables, placed horizontally or arranged in an (more...)
02/07/2013
VISION BOLLARD
Pedestrian bollard with square base, made out of press-folded steel sheet. The rectangular window in the centre of the structure, with opaque compact polycarbonate sheet, is illuminated by a 7,5W (more...)
14/05/2013
VOLO BENCHES
Collection of modular benches made from the folding of a single laser cut sheet. Four models are available in two different sizes, with or without backrest equipped with stainless steel (more...)
25/03/2021
VOLO EVOLUTION
Collection of modular benches with backrest equipped with stainless steel spacers and armrests in cast aluminum, made from the folding of a single laser cut sheet. Two sizes are available. The backrest (more...)
02/07/2013
WORD BOLLARD
Pedestrian bollard or cycle stand made out of press-folded steel with central rectangular window. POWDER COATED STEEL OR CORTEN STEEL OR STAINLESS STEEL FIXINGS: PREDRILLED FOR ANCHORS OR BELOW GROUND INSTALLATION Dimensions and weight: 200x50 (more...)
02/07/2013
YES LITTER BIN
Litter bin made from a robust sheet galvanized and powder coated steel or cortex steel, with a 45 ° inclined lid and side walls, one of which can be opened with (more...)
02/07/2013
ZAFFIRO BOLLARD
Collection od spherical pedestrian bollards with flat cap, made of PDM (Reconstituted Stones) and equipped with stainless steel support base. The sphere can be positioned in three different positions. Two versions of (more...)